Sandblasting Khabinete ho qhomisa e Pot And Sandblaster Likarolo
  • Automatic sand blasting cabinet with 4 guns for blasting mou

    Jarolla ka ho iketsa lehlabathe qhomisa raka le lithunya 4 bakeng sa ho qhomisa e Mou

    Khabinete ea Sandblasting e sebetsana le lihlahisoa tse fapaneng, joalo ka mabili a motsoako, hlobo, seemahale, makoloi, jj

    E ts'ehetsa ho hloekisa, ho qhekella, ho theoha, ho tlosa mafome, ho nchafatsa tšepe e ngata kapa eo eseng ea tšepe
    mesebetsi ea matsoho ho fumana sebaka se boreleli le se hloekileng bakeng sa basebelisi ba ho qetela, kapa ho ba sebaka sa pele sa ts'ebetso ea ts'ebetso.
  • Suction Sandblasting Machinery for blasting Long and big Parts

    Motsoako oa Sandblasting oa ho qhomisa likarolo tse telele le tse kholo

    Boholo ba kopo:

     

    Mefuta eohle ea Bonono le Crafts, dipolasetiki, hardware, thepa ea ka tlung, mekhabiso holim bentsa, sandblasting ho tlosa mengoapo

    ntlafatsa roughness, ntlafatsa mamarello, hloekisa bokaholimo; likarolo tsa ho lahla, ho tapa likarolo, likarolo tsa kalafo ea mocheso ho hola, mafome, ntlafatso ea likarolo; bentsa le matte.

    lihlahisoa tsohle tsa tšepe, khalase, mesebetsi ea matsoho ea polasetiki, mabenyane, likhalase, lioache, li ka sebelisoa bakeng sa ho fafatsa, ho khetha pele ho kalafo e le ho ntlafatsa khokahano ea bokaholimo le mabenyane ohle.

    Sebelisa lisebelisoa tsa lehlabathe:

    BAGUAN Abrasives phepelo e sa feleng: lehlabathe le sootho la corundum, lehlabathe la khalase, khalase ea silicon carbide, lehlabathe la lepa, lehlabathe la lehoakhoa, emery, lehlabathe la alumina, lehlabathe la tšepe, libolo tsa tšepe, likaroloana tsa polasetiki (lehlabathe la nylon), lifaha tsa ceramic, jj.

  • High Pressure Sandblasting Equipment for blasting mould/Motor parts

    Lisebelisoa tse phahameng tsa khatello ea tšepe bakeng sa ho qhomisa hlobo / likarolo tsa makoloi

    Li-gloves tsa rabara tse telele tsa 1,24 resist li hana ho tsofala le ho sireletsa opareitara.

    2. Leseli la bopaki ba lerōle bakeng sa ponahalo e sa tloaelehang.

    3. Lits'ireletso li kenella li qhomisa ha monyako o butsoe.

    4. Ts'epe ea tšepe e hahiloeng ka tšepe, e nang le litšepe tse bopehileng hantle, e theha khetla e thata, e tšoarellang nako e telele.

    5. Fensetere ea pono ea khalase, ea fapanyetsana. 6. Taolo ea khatello, gauge le switch ea motlakase e kenngoeng habonolo.

    7. Sethunya se le seng sa khatello se nang le boron carbide nozzle dia 8mm.

    8. Sethunya se hahelletsoeng se thusa ho boloka lerōle kahare ho khabinete.

    9.Pneumatici foot pedal switch bakeng sa ho kenya letsoho ts'ebetsong.

    10. Filter e ommeng Dust colletor: Ho hloekisa ka letsoho.

    11.Air mohloli oa khatello ea 8bar (kg / cm2); Phalla 1.5-2m3 / min

  • Dry Abrasive sandblast cabinet

    Khabinete e ommeng ea sandblast e ommeng

    Applecation:

    Lik'habote tse khabisang tsa sandblast tse loketseng kalafo e kaholimo ea lihlahisoa tsohle tsa tšepe, polasetiki le khalase.
    ho tlosa letlalo la oxide. masale burrs le mengoapo li ka sebelisoa bakeng sa mokhabiso khanya .matte le ho matlafatsa tsamaiso,

    Molemo :
    Ho na le sistimi ea karohano ea leholiotsoana le sistimi ea ho tlosa lerōle, karohano e tla arola
    khorofo tloha bust .le oona tsamaisong tlosa lerōle ka sebetsana le ho bokella emit nang thuso lerōle, lerōle tlosa phello ea molemo
    fokotsa litšenyehelo tsa ho khorofo le ho ntlafatsa ts'ebetso .le ha ho na tšilafalo ea tikoloho.

    Ho qhomisa mecha ea litaba : White Aluminium oxide. Aluminium oxide e sootho. Lihlahisoa tsa Glass

  • Suction abrasive sandblaster with turntable

    Motsoako oa sandblaster o khorofo o nang le turntable

    Monyako o senyang sandblaster o nang le li-Applicator tsa turntable Mochini ona o loketse ho qhomisa mesebetsi e boima, joalo ka mefuta e fapaneng ea hlobo, seemahale, likotoana tsa ho betsa, likoloi, mabili a aluminium, mabili a mabili, ect. Likarolo tsa 1.Have sesebelisoa sa sandblasting sa desktop se khethollang; 2.Specialrailcarttothedesign, canhangontheheavywork, isveryconvenient, eneji; 3.Cartwheel, ho latela tloaelo ea ts'ireletso; 4.Mabobasedoncustomerdemand, selectmanualorautomaticrotarytables. 5.The khethehileng etselitsoeng pukwanana kariki, ka ...
  • Suction type dry Sand Blasting machine with Turntable

    Mofuta oa ho hula mochini o ommeng oa Sand ho qhomisa o nang le Turntable

    Kopo & Molemo:

    • Mochini ona o boima oa sandblasting o loketse mesebetsi e boima, joalo ka mefuta e fapaneng ea hlobo, lifate, liemahale, li-castings, likoloi, jj.
    • Likoloi tse entsoeng ka ho khetheha (likoloi tsa motlakase), li bonolo ebile lia sebetsa. Ts'ebetso le

    tokiso e bonolo ho ithuta.

    • E kanna ea ipapisa le tlhoko ea bareki, khetha litafole tse tsamaeang ka letsoho kapa tse iketsang.
  • Suction dry sandblast cabinet

    Khabinete e hulang ka lehlabathe e ommeng

    Lehlabathe le omileng le phatlohang ka khabinete e nang le lerōle, sperator, sethunya se phatlohileng ka nozzle, liatlana

    ho qhomisa mecha ea litaba: aluminium oxide e khalase

    k'habete e ommeng ea lehlabathe e omileng e loketse kalafo e kaholimo ea lihlahisoa tsohle tsa tšepe, polasetiki le khalase ect.
    ho tlosa letlalo la oxide. masale burrs le mengoapo li ka sebelisoa bakeng sa mokhabiso khanya .matte le ho matlafatsa
    tsamaiso, Ho na le sistimi ea ho arohana le maholiotsoana le sistimi ea ho tlosa lerōle, karohano e tla arola
    khorofo tloha bust .le oona tsamaisong tlosa lerōle ka sebetsana le ho bokella emit lero le se nang thuso .and ka temoso ya
    hloekisa lerōle ka bohona. lerōle tlosa phello ea botle. fokotsa litšenyehelo tsa khorofo le ho ntlafatsa katleho.
    ebile ha ho na tšilafalo ea tikoloho.
    Ho qhomisa mecha ea litaba: White Aluminium oxide. Aluminium oxide e sootho. Lihlahisoa tsa Glass

    Mohlala
    Kantle ka boholo (L * W * L mm)
    CABIN boholo (L * W * L limilimithara)
    HST6050EA 960 * 650 * 1520 600 * 500 * 520
    HST7660EA 1050 * 810 * 1580 760 * 600 * 520
    HST9060EA 1050 * 950 * 1580 900 * 600 * 580
    HST9080EA 1250 * 950 * 1580 900 * 800 * 580
    HST1010EA 1420 * 1050 * 1900 1000 * 1000 * 800
    HST1212EA 1620 * 1250 * 2000 1200 * 1200 * 800
    Phepelo ea motlakase: 220V (380V). 50HZ
    Mabone: lebone la likhohola khanya ea motlakase 220V, 13W
    Koloi e arohaneng: 220V, 50HZ, 0.75KW
    Phepelo ea moea e hatelitsoeng: Moea o omileng le o hloekileng o hatelletsoeng ka khatello
    ho 2.8-7bar (kg / cm2) le phallo ea 0.5-1.1m3 / min
    Ho tlosa lerōle: Mookelli oa lerōle la mofuta oa mokotla, tumello ea phofo
    ka ho tsitsinyeha hoa moya
    Ho na le Thermostatic futhumatsang sesebediswa ka omisa ka tsela e iketsang ho thibela khorofo ho hema

    1) Setšoantšo sa sandblast morao

    1-121130123F9233

     

    Mantsoe: re ne re ka hlahisa e le li-requirpments tsa bareki, re etsa lehlakore le letona la ho bula monyako, lemati le bulehileng ka lehlakoreng le letšehali, lemati le bulang ka pele, kapa monyako o holimo oa ho bula jj.

    2) Likarolo tse kholo tsa mochini:

    1-13123010441D03

    3) sebetsa likotoana pele le ka mor'a lehlabathe qhomisa

    1-13123010462Ia1-131230104RGE

  • Dry sandblast machine with turntable

    Mochini o omileng oa sandblast o nang le turntable

    Mochini o omileng oa sandblast o nang le turntable

    A loketse bakeng sa ho qhomisa ka workpieces boima, tse kang mefuta e sa tšoaneng ea hlobo, sefate, seemahale, castings, dilenaneo, joalo-joalo.

    Ho khethehileng etselitsoe likariki pukwanana (likariki motlakase), e ka ba koloi eketsa turntable sandblasting ezalaki na mwa ndako,

    e bonolo ebile e potlakile. Ts'ebetso le tlhokomelo li bonolo ho ithuta.

    Likaroloana: 

    1.Ke fetohile desktop sandblasting mochini bath;
    2. Kariki e khethehileng ea seporo ho ea moralo, e ka fanyeha mosebetsing o boima, e bonolo haholo, matla;
    3. Koloi ea koloi, ho ea ka matlafatso ea bareki;
    4. E kanna eaba e ipapisitse le tlhoko ea bareki, khetha litafole tse tsamaeang ka letsoho kapa tse iketsang.
    E loketse bakeng sa: e 'ngoe le e' ngoe ea lehlabathe le boima la mosebetsi o boima: joalo ka mefuta eohle ea hlobo, hlobo ea khomphutha ea khomphutha, matla a khoheli, khatello
    Force hlobo joalo joalo ka boholo bo boholo workpiece sandblasting

    Nomoro ea Mohlala Kariki ID (limilimithara) Boima ba 'mele (kg) Boholo ba Monyako oa Left (mm)
    HST9080FTA 600 160 Up500 * down700 * e phahameng560
    HST9080TA 600 160 Up500 * down700 * e phahameng560
    HST1010FTA 700 150 Wide650 * phahameng780
    HST1010TA 700 150 Wide650 * phahameng780
    HST1212FTA  800 160 Wide750 * phahameng780
    HST1212TA 800 160 Wide750 * phahameng780

    Phepelo ea motlakase: 220 V50Hz;
    Leseli la likhohola tsa mochini: mabone a pholosang matla a 220 V13W;
    Boima ba boima ba lik'hilograma tse 320: mochini; Behang: 100 lik'hilograma;
    Sesebelisoa sa Separator: 220 V50Hz550W;
    Sekarolo sa moea: limithara tse 8.5 tsa likhubiki / mets;
    Mohloli oa moea o petelitsoeng: 2 - 8 bareng
     Setšoantšo se ka morao sa mochini oa sandblast oa Turntable

    1-140122161942536