Sandblasting Khabinete ho qhomisa e Pot And Sandblaster Likarolo
  • Sandblaster Parts Nylon quick couplings for sandblasting hose

    Likarolo tsa Sandblaster Nylon li kopanya kapele bakeng sa phaephe ea lehlabathe

    Quick Nylon couplings bakeng sandblast Hose sandblast nozzle pane bakeng sa mochini sandblasting

    Ho na le boholo bo fapaneng ba 4 ka tsela e latelang:

    Q-IM-NY ho lekana Hose ea OD34mm 

    Q-1-NY ho lekana Hose ea OD39mm 

    Q-2-NY ho lekana Hose ea OD50mm 

    Q-3-NY ho lekana Hose ea OD55mm 

    SB-NY e nang le khoele e ntle ea 45mm 

    Ha phatloha tube, ha e telele ka ho lekaneng, re ka hokela methapo tse peli le coupling rona kapele.

    Mokhoa oa ts'ebetso:
    1. Methapo e 'meli e bolelele bo lekanang: Ntša manonyeletso a mabeli a boholo bo lekanang, hokahanya bayonet

    tobetsa ebe o potoloha ho ts'oasa, ebe o hokela tube ea sandblasting lipheletsong ka bobeli.
    2. Methapo e 'meli ea bolelele bo fapaneng: Ntša manonyeletso a mabeli a boholo bo lekanang, hokahanya bayonet

    tobetsa ho potoloha, 'me joale hokela le sandblasting tube, lipheletsong bobeli.
    3. Sandblasting tank joint: Hokela lenonyeletso la rona le lekhuts'oane ka kotlolloho mochini oa sandblasting.
    Melemo: Ts'ebetso e bonolo, khokahano e potlakileng le phala ea lehlabathe, ntlafatso ea ts'ebetso ea ts'ebetso e nang le mathata a sa hlokahaleng, ho lokisa habonolo.
    Ketsahalo: A loketse bakeng sa kaho ea likepe, kholo workpiece degreasing, tšepe sebopeho, castings kholo, hlobo e khōlō, mechine casings lik'hontheinara di-valve thepa meepo, joalo-joalo

  • High pressure sand blasting hose

    Phahameng khatello ea lehlabathe qhomisa Hose

    Tube: ba batsho antistatic abrasion manganga mofuta rabara komponeng
    Matlafatso: ka khoele ea Nylon ply
    Sekoahelo: black abrasion le rabara antistatic.
    Likopo: bakeng sa ho hloekisa liindasteri, ho itšeha, ho bentsa, ho lahla lits'ebeletso tse sebeletsang.
    Mocheso:
    -40 ° C + 80 ° C
    Paka:fetisetsa Filimi ea PVC

  • Cylindrical Ceramic Blasting Nozzles

    Cylindrical Ceramic ho qhomisa e Nozzles

    Mabapi le li-nozzle tsa Ceramic

    • Nako e telele ea ceramic sandblast nozzle bakeng sa ente ea likaroloana tse mahareng bakeng sa ho tlosa ka potlako pente, mafome, ts'enyeho le sekala.
    • Haholo-holo sebelisoa bakeng sa ho sebetsa tebileng tse kang sandblasting le fatiloeng khalase. Ho betla le ho sebetsana le 'mabole le majoe a mang.
    • A loketse bakeng sa sandblasting le derusting holim 'a likarolo mechine liindasteri le castings kang mechine le foromeletsoeng metallurgical.
    • U ka sebelisa mefuta e fapaneng ea media e sitsoeng ka lehlabathe joalo ka lifaha tsa khalase, corundum e sootho, garnet, metsi a soda, khetla ea walnut.
    • Paka moelelo: ceramic nozzle * 10.
  • sell well double venturi boron sandblast nozzle for you

    rekisa hantle habeli venturi boron sandblast nozzle bakeng sa hau

    Ponahalo e: k'habone tšepe khetla mora lehlabathe qhomisa le plating, aluminium khetla mora lehlabathe qhomisa.

  • High quality Venturi Boron Carbide Nozzle High Pressure Sandblasting Nozzle

    Boleng bo phahameng Venturi Boron Carbide Nozzle High Pressure Sandblasting Nozzle

     phahameng thatafala e ntle qhoaele manganga thepa ts'enyeho hanyetsa phahameng mocheso ho hanyetsa segokanyipalo: ≥2.48g / cm3 dikokwanyana thatafala ≥3500kgf / mm2 khumama matla: 220mm Bore bophara: 6/8 / 10mm
  • 1 1/4” Venturi boron carbide sandblasting nozzle

    1 1/4 "Venturi boron carbide leqhubu la lehlabathe

    Metsoako ea boron carbide hangata e apesa li-nozzle tsa tungsten carbide makhetlo a mahlano ho isa ho a leshome le silicon carbide ka makhetlo a mabeli ho isa ho a mararo.

    Ho khothalletsoa li-nozzle tsa boron carbide hore li sebelisoe ka li-abrasives tse kang aluminium oxide le likarolo tse mabifi tsa liminerale.

  • Sandblast Nozzle for Sand Blaster Tip Sand Nozzle B4C Boron Carbide Nozzle 80*20*6/8mm

    Sandblast Nozzle bakeng sa Sand Blaster Tip Sand Nozzle B4C Boron Carbide Nozzle 80 * 20 * 6 / 8mm

    •  thatafala e phahameng
    •  thepa e ntle ea ho itšireletsa
    •  ts'enyeho hanyetsa
    •  mocheso o phahameng oa ho hanyetsa
    •  letsoalo: -2.48g / cm3
    •  micro thatafala ≥3500kgf / mm2
    •  koba matla: ≥400Mpa
    •  qhibiliha ntlha: 2450 ℃
    •  Mocheso o sebetsang: mocheso o tloaelehileng
    •  Sebetsa khatello ea: 5-100P
  • Yellow Plastic Quick Connector for Sandblasting Hose

    Sehokedi sa Potlako se Potlakileng sa Potlako sa Hose ea Sandblasting

    Yellow Plastic Quick Connector bakeng sa sandblasting likarolo tse ling tsa sandblasting tse ling le nna.Ke a leboha! Sesebelisoa sa mantlha: Boholo: Ho tloha ho: 1 ".1-1 / 4" .1-1 / 2 ".2" Boitsebiso: Nylon    
  • Nylon Holders for Connect Sandblasting Nozzles and Blasting Hose

    Lisebelisoa tsa Nylon bakeng sa li-nozzles tsa Connect Sandblasting le Hose e qhomisang

    Mefuta e fapaneng e latelang:

    MHE-IM-NY Khoele e mahoashe 50mm pheletso e ngoe ho lekana hose ea OD34mm

    MHE-1-NY Khoele e mahoashe 50mm pheletso e ngoe ho lekana hose ea OD39mm 

    HE-2-NY Khoele e ntle 41mm pheletsong e ngoe ho lekana hose ea OD 50mm

    MHE-3NY Khoele e mahoashe 50mm pheletso e ngoe ho lekana hose ea OD 55mm 

  • Boron Carbide Water sandblasting Gun Sandblaster Nozzle with Nylon Nozzle Holder Dustless working

    Boron Carbide Metsi a sandblasting Gun Sandblaster Nozzle le Nylon Nozzle Holder e sa sebetseng

    Tšobotsi:
    Metsi, li-abrasives le moea li kopane kahare ho nozzle, ka hona ha e sebetse ka lerole
    Tšebeliso ea Metsi e nang le li-nozzle ka tlase haholo ho feta ka mekhoa e meng ea ho phatloha ha metsi
    Nako e telele ea bophelo ka lebaka la liner nozzle material tungsten carbide

  • Abrasive Sandblaster nozzles boron carbide nozzle 35*20*3/4/5/6/8/10/12mm

    Khorofo Sandblaster nozzles boron carbide nozzle 35 * 20 * 3/4 ​​/ 5/6/8/10 / 12mm

    Likaroloana:
    Low segokanyipalo, thatafala phahameng le matla ts'enyeho.
    Low mogote conductivity. Super duarable.
    Ga tlhaloso:
    Boikarabello: -2.48 / cm3
    Microhardness: ≥3500kgf / mm2
    Matla a Flexural: ≥400MPa
    Qhibiliha ntlha: 2450 ℃
    Bophelo bakeng sa lisebelisoa tse ling le tse ling: Steel Shot: 2000-2500h, lehlabathe la Quartz: 1000-1500h, Corundum: 500-1000h
    Lintho tse bonahalang: boron carbide
    Litekanyo: 35x20mm / 1.38 × 0.79inch
    Bore bophara: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm
    Mala: o motsho
    Palo: 1 Pc
    Tlhokomeliso: Ka kopo lumella phoso ea 0-1cm ka lebaka la litekanyo tsa matsoho. pls etsa bonnete ba hore ha o na taba pele o etsa kopo.
              2.Ka lebaka la phapang lipakeng tsa basekaseki ba fapaneng, setšoantšo se kanna sa bonahatsa 'mala oa ntho eo. Kea leboha!
    Sephutheloana se kenyelletsa:
    1 x Pompo ea Sethunya sa Sandblasting
  • High quality Boron carbide sandblasting nozzle with PU Jacke

    Boleng bo phahameng Boron carbide sandblasting nozzle le Pu Jacke

    Boima ba boron carbide bo maemong a bobeli feela ho daemane le Cubic BN. Sekhahla sa lihlahisoa tsa boron carbide se hlahisoang ke rona se haufi le letsoalo la eona la thuto (2.52g / cm3).

     

    Melemo ea eona ke: Boima bo phahameng, bokhoni bo phahameng ba ho roala, anti-kutu, litšenyehelo tse tlase ts'ebelisong e ngoe le e ngoe, ho fokotsa nako. Ke thepa e loketseng lehong la sandblasting le tiiso ea mochini.

12 E latelang> >> Leqephe la 1/2